Take a look at the igluetech/UES Glue Application System Tanks

2020
23
NOV

 

 

PerfectMelt

  • Energy-saving intelligence
  • One-hand operation possible
  • Intuitive color touch display
  • Melting exactly as required
  • 2, 4, 6 or 8 hose connections
  • Easiest maintenance access
  • Programmable time switch control
  • Maximum compatibility thanks to temperature controllers for NI120, PT100, FECU, NTC sensors

The optimum character of the new perfect Melt is the best consequence of 20 years of experience in hot melt technology. The fresh, appealing design was consciously paired with a robust and stable steel housing.

The modern technology of the system integrates a lot of innovations for perfect operation in every hotmelt production unit. The dust- and dirt-resistant 4.3 "color display with a touch-sensitive surface allows intuitive control of the system.

As we are aware that not everything runs completely clean in production facilities, the devices are the perfect meltRow can be operated with one hand and gloves using the safety input wheel. Thanks to the ingenious positioning of the access flaps, your machine does not need to be dismantled in the event of maintenance / cleaning, as all parts can be reached through the large openings on the front.

The XL system series is for all users who need reliable melting and distribution of large quantities of glue. Do you need larger quantities of glue? Then our MaxMelt is definitely the right device for you.

As the successor to the UES Compact2 with almost identical external dimensions, there is consistent connection compatibility to UES and comparable systems.

perfectMelt

 

PerfectMelt SE

  • from 4 l to 8 l tank volume
  • Intuitive color touch display
  • 4 hose connections
  • Compatible with hoses / application heads from common suppliers
  • One-handed operation
  • Programmable time switch control
  • Maximum compatibility thanks to temperature controllers for NI120, PT100, FECU, NTC sensors

The innovative basic table-top units with intuitive operation guarantee maximum energy and material savings. Thanks to their compact dimensions, they can easily be provided or installed in parent machines.

Digital I / O interfaces and signaling contacts for the machine status for connection to the higher-level control of the parent machine offer you full control over the device.

The perfect Melt SE has the same intuitively operated touch display as our perfect Melt as well as a weekly timer program and is therefore ideally suited for integration into fully automatic systems as an "OEM base device".

As the successor to the UES Compact and Compact SE with almost identical external dimensions, there is consistent connection compatibility to UES and comparable systems.

perfectMelt SE


ExactaMelt

  • exacta melt

    optionally 4 l or 8 l tank volume

    Furnishing

  • Precision gear pump device
    • Pump sizes from 0.87 - 7.30 ccm
  • One-handed operation
  • Intuitive color touch display
  • 2 hose connections
  • Operation without compressed air
  • Maximum compatibility thanks to temperature controllers for NI120, PT100, FECU, NTC sensors
  • exacta melt

    optionally 4 l / 8 l / 14 l / 20 l / 30 l tank volume

    The exacta Melt series offers all the advantages of the easy version, expanded by the following features:

  • Manual or automatic motor control
  • Variable motor speed and delivery rate
  • 2/4/6/8 hose connections of your choice

Our exacta Melt devices with precision gear pumps of the highest quality ensure an exactly even glue application without pulsation and pressure fluctuations at any machine speed.

The materials used and the lack of compressed air reduce operating and maintenance costs.

The modern technology of the system integrates a lot of innovations for perfect operation in every hotmelt production unit. The dust- and dirt-resistant 4.3 "color display with touch-sensitive surface allows intuitive control of the system. All variants are equipped with the tried and tested safety input wheel and thus enable one-handed operation of the devices - even with gloves.

exactaMelt

MaxMelt

from 25 l to 100 l tank volume

Furnishing

  • Proven perfect Melt control
  • Digital inputs and outputs
  • High melting capacity
  • Separate heating circuits for tank and glue distributor
  • PT 100 sensors
  • Teflon-coated cast aluminum tank
  • Extra large tank opening with overflow protection
  • Pump drive with three-phase motor and frequency converter
  • Pressure relief valve
  • Glue drain screw

The Max Melt series impresses with its strong melting capacity and high flow rates. The large standing devices are essential when it comes to the continuous application of large quantities of glue.

Max Melt systems are usually equipped according to customer specifications. Special requirements such as an extended control system, unusual connection options or optimization for materials other than hot glue are nothing unusual. Of course we also offer systems with basic equipment.

The large tank options of the MaxMelt series reduce the refilling effort, which can be further reduced by combining it with a PowerFill. The Maxmelt series is equipped with separate heating circuits for the tank and glue distributor so that the glue remains the same temperature everywhere in the machine, even with large quantities. Modern sensor technology ensures that the temperatures never deviate by more than 1 ° C.

MaxMelt

PowerFill

  • Suction conveyor with feed hopper and holder
  • 3 m flexible delivery hose
  • Double-walled pipe to optimize the dew point
  • Large air filter for optimal air exchange
  • Optimized glue feed prevents hot vapors from entering the hose
  • Sensor and control for glue filling quantity and automatic on / off switch
  • Adapter plate replaces tank cap

Downtime because you forgot to refill glue? Contamination of the glue and the tank system due to frequent opening of the tank? Is the machines dirty from overcrowding?

The PowerFill automatic granulate conveyor solves these problems! PowerFill is simply mounted on the tank filler opening of the hotmelt system instead of the tank lid and the lance is placed at the end of the conveyor hose in the storage container. A sensor detects the fill level of the glue in the tank unit and automatically switches the granulate pumping on or off again when the set amount is reached. The lance destroys any possible clumping of the material by shaking it.

The system can be retrofitted to any common glue application device, regardless of the manufacturer .

PowerFill

Copyright © 2021 Integrated Glueing Technology Ltd  |  All Rights Reserved
3 Lancaster Park
Bowerhill
Melksham
Wiltshire
SN12 6TT
United Kingdom
t: 01225 783456
e: general@igluetech.co.uk